Samsung Digimax350 SE - Manual (Page 23)

READY
PREPARATION
Instructions on how to use the CF CARD
Using a new CF CARD for the first time
Before using the CF CARD, it must be initialized.
Initializing prepares the CF CARD for recording data.
For more details, please refer to page 67
Preserving the CF CARD data
If the card is subjected to any of the following, the recorded data may become corrupted :
- When the CF CARD is used incorrectly.
- If the power is switched off while recording, deleting(formatting) or reading.
It is advisable to copy important data onto other media as back-up e.g. floppy disks,
hard disks, CD etc.
Samsung cannot be held responsible for lost data.
Important information on the use of the CF CARD
If you switch off this camera while it is reading, initializing or playing, the information on the
CF CARD may be corrupted.
The CF CARD is an electronic precision device. Do not bend, drop or subject the card to any
heavy impact.
Do not store the CF CARD in an environment with strong electronic or magnetic fields, e.g.
near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes of temperature.
Do not allow the CF CARD to become dirty or to come into contact with any liquid.
Should this happen, clean the card with a soft cloth.
Please keep the CF CARD in its case when not in use.
During and after periods of extended use, you may notice that the CF CARD is warm.
This is perfectly normal.