Samsung Digimax350 SE - Manual (Page 119)

FAQ
About USB
[Case 7] There is an unexpected error during file transfer.
Turn the camera power off and on again. Then transfer the file again.
[Case 8] How do I know my computer supports USB Interface?
Check the USB port in your computer or keyboard.
Check OS version. USB Interface is available in Windows 98, 98SE, 2000, ME
.XP.
Check [Universal serial bus controller] in Device Manager.
Do the following to check [Universal serial bus controller].
Win 98/ME : Trace [start setting controller system Device Manager
Universal serial bus controller].
Win 2K : Trace [start setting controller system Hardware Device
Manager Universal serial bus controller].
Win XP : Trace [start Control Panel Performance and Maintenance
system Hardware Device Manager Universal Serial Bus
controller].
There must be USB Host Controller and USB root hub under [Universal serial bus
controller].
When all the conditions mentioned above are met, the computer can support the
USB interface.
[Case 9] When using USB hub.
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.
[Case 10] Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC with another USB
cable. In this case, disconnect the other USB cable, and connect only one USB
cable to the camera.
SOFTW
ARE