Using other team functions, Turning group call on and off – Siemens HIPATH 2000 User Manual
Page 96
Step by Step
Using Other Team Functions
96
Using Other Team Functions
Turning Group Call On and Off
If this function has been configured (contact your ser-
vice personnel), you belong to one or more groups of
users who can each be reached under a hunt group or
group call number.
Incoming calls are signaled on all group member tele-
phones in the order in which they are received ( hunt
group) or simultaneously (= group call) until one mem-
ber of the group accepts the call.
You can also belong to a team (including executive/sec-
retary ones) in which station numbers are programmed
on trunk keys
Each member of the group remains available under his
or her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding an executive/secretary team).
If the LED on a programmed "US:Join/leave group
UK:Hunt group join/leave" key
Æ Page 63 is illuminated,
this means that the audible tone was activated for at
least one group.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)