Ending the call, Redialing a number, Ending the call redialing a number – Siemens HIPATH 2000 User Manual
Page 17
Making Calls – Basic Functions
17
Step by Step
The called party does not answer or is busy:
Press the key. The LED goes out.
Ending the call
t
Replace the handset.
or
Press the key.
Redialing a Number
The last three external telephone numbers dialed are
stored automatically.
You can redial them simply by pressing a key.
The station number appears on your screen for two sec-
onds and is then dialed.
Press the key once to dial the number last dialed.
Press the key twice to dial the next to the last number
dialed.
Press the key three times to dial the third-to-the-last
number dialed.
Displaying and dialing saved station numbers
Press the key.
:
Press the "OK" dialog key within two seconds to confirm
your choice.
:
The next stored number is displayed. Press the "OK" di-
alog key to confirm four selection.
>
:
Select and confirm.
Speaker
Your system may also be programmed so that
you have to press the Internal key before you dial
an internal number.
To call an external party, you have to enter an ex-
ternal code before dialing the party’s telephone
number (Prime Line is not active; contact your
service personnel).
Release
Redial
Redial
Next?
Next?
Call?
If this feature is configured (contact your service
personnel), account codes entered are also
saved