Sanyo SCP-7050 - Manual (Page 39)

Selecting Vibrate Pattern
With this feature, you can select vibrate pattern for incoming
calls, messages, and schedule alarms.
1. Select > Settings > Sounds > Vibrate Pattern.
2. Select Incoming Calls, 10-4 ,Voicemail, Messaging, or
Calendar/Alarm. The following items require an additional
step:
Ⅲ Incoming Calls: select With Caller ID, No Caller ID, or
Roaming.
Ⅲ 10-4: select 10-4 Calls or 10-4 Missed.
Ⅲ Messaging: select Text, Pic Messaging or Web Alerts.
3. Select a vibrate pattern and press .
Selecting a Tone Length
1. Select > Settings > Sounds > Others > Tone Length.
2. Select Short or Long.
Setting a Start-up/Power-off Tone
1. Select > Settings > Sounds > Others.
2. Select Start-up Tone or Power-off Tone.
3. Select a tone, and press .
Using Voice Prompt
This feature allows you to hear voice prompts Voice-activated
dialing, when using Voice Memo, Screen Call setting, etc.
(Default Setting is Off.)
1. Select > Settings > Sounds > Others > Voice Prompt.
2. Select On.
Tip: When ringer volume is set to Silence All or Vibrate All , voice
prompts cannot be heard.
31