Sanyo SCP-7050 - Manual (Page 120)

Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish a trusted
connection between your phone and another Bluetooth device.
When devices are paired, a passcode (PIN Code) is shared
between devices, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Select > Tools > Bluetooth > > Search. (Your
phone will display a list of discovered in-range Bluetooth
devices.)
2. Select the device you wish to pair with and press .
3. Select Add to Trusted.
4. Enter the passcode and press . (When the owner of the
other device accepts the connection and enters the same
code, the pairing is complete.)
Waiting for Request
If you are going to be using a Dial-Up Network (DUN) profile to
pair with a PC or PDA, you will need to allow the other device to
initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1. Select > Tools > Bluetooth > > Wait for Request.
2. Follow the onscreen prompts to enter your passcode and
press .
112