SUPER MICRO Computer X7SLA-H - Manual (Page 66)

4-16
X7SLA-L/X7SLA-H User’s Manual
4-4 Security Settings
The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set first.
Change Supervisor Password:
Use this feature to set a supervisor password. It secures the system from unau-
thorized use by restricting access to persons only with the proper supervisor-level
password. Select this feature and press , and then type in the Supervisor
Password.
User Access Level
This feature appears when the Supervisor Password is set. Use this to assign an
access level for a user. The options are: No Access, View Only, Limited, and
Full
Access.
Change User Password:
Use this feature to set a user password. It secures the system from unauthorized use
by restricting access to persons only with the proper user-level password. Select
this feature and press , and then type in the User Password.
Clear User Password
This feature appears when the User Password is set. Select this to clear the User
Password.
BIOS SETUP UTILTY
Main Advanced Security Boot Exit
���� : Move
Enter : Select
+/-/ : Value
F10 : Save
ESC : Exit
F1 : General Help
F8 : Fail-Safe Defaults
F9 : Optimized Defaults
vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.
Security Settings
Supervisor Password : Installed
User Password
: Installed
Change Supervisor Password
User Access Level
[Full Access]
Change User Password
Clear User Password
Password Check
[Setup]
Boot Sector Virus Protection [Disabled]
Install or Change the
password.