SUPER MICRO Computer X7SLA-H - Manual (Page 52)

4-2
X7SLA-L/X7SLA-H User’s Manual
Starting the Setup Utility
Normally, the only visible POST (Power On Self Test) routine is the memory test.
As the memory is being tested, press the key to enter the main menu of
the AMI BIOS Setup Utility. From the main menu, you can access the other setup
screens. An AMI BIOS identification string is displayed at the left bottom corner of
the screen, below the copyright message.
Warning!!
Do not shut down or reset the system while updating BIOS
to prevent possible boot failure.
4-2 Main Setup
When you first enter the AMI BIOS Setup Utility, you will enter the Main setup screen.
You can always return to the Main setup screen by selecting the Main
tab on the
top of the screen. The Main BIOS Setup screen is shown below.
BIOS SETUP UTILTY
Main Advanced Security Boot Exit
���� : Move
Enter : Select
+/-/ : Value
F10 : Save
ESC : Exit
F1 : General Help
F8 : Fail-Safe Defaults
F9 : Optimized Defaults
vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.
System Overview
System Time [ HH :MM:SS]
System Date [Tue 04/24/2009]
Supermicro X7SLA
Version : XX.XX.XX
Build Date : XX/XX/XX
ID
: X7SLA000
Processor
Intel(R) Atom (TM) CPU 330 @ 1.60GHz
Speed
: 1600MHz
Physical Count / Logical Count : 1
System Memory
Available Size : 2040MB
Populated Size : 2040MB
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system time.