SUPER MICRO Computer X7SLA-H - Manual (Page 58)

4-8
X7SLA-L/X7SLA-H User’s Manual

Video Function Configuration
DVMT Mode Select
This option allows the user to set the DVMT mode. The options are Fixed Mode,
DVMT Mode and the COMBO mode.
DVMT/Fixed Memory
This option allows the user to set the amount of memory to be used for
operation in the DVMT/Fixed Mode. The options are 64 MB,
128 MB and
Maximum DVMT.
Boot Display Device
This option allows the user to select the boot display device. The options are
CRT on Port 0, LFP on Port2, and CRT-Port 0 & LFP-Port 2.
USB Functions
This feature allows the user to enable or disable the onboard USB ports. The op-
tions are Disabled and
Enabled.
USB 2.0 Controller
Select Enabled to activate the onboard USB 2.0 controller. The options are
En-
abled and Disabled.
 USB Configuration
This feature allows the user to configure USB settings for the motherboard.
Legacy USB Support
Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy
USB support will be automatically enabled if a legacy USB device is installed
on the motherboard, and vise versa. The settings are Disabled, Enabled and
Auto.
USB 2.0 Controller Mode
This setting allows you to select the USB 2.0 Controller mode. The options are
Hi-Speed (480 Mbps) and Full Speed (12 Mbps).
BIOS EHCI Hand-Off
Select Enabled to enable BIOS Enhanced Host Controller Interface support to
provide a workaround solution for an operating system that does not have EHCI
Hand-Off support. When enabled, the EHCI Interface will be changed from the
BIOS-controlled to the OS-controlled. The options are Disabled and
Enabled.