Establishing the s-air connection, Establishing.the.s-air, Connection – Sony AIR-SA20PK User Manual
Page 18
AIR-SA20PK.GB.4-117-793-32(1)
1
GB
To use the remote
Slide and remove the battery
compartment lid, and insert the two
supplied R03 (size AAA) batteries,
side first, matching the polarities shown
below.
Remote for the main unit
(RM-ANU0)
Remote for the sub unit
(RM-ANU0)
Notes on using the remote
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Establishing the S-AIR
connection
You can easily establish the connection
by setting the same S-AIR ID for the
main unit and the sub units.
1
Check.that.the.wireless.
transceivers.are.inserted.
securely.to.the.main.unit.and.
the.sub.units.(page.17).
2
Turn.on.the.main.unit.and.the.
sub.units.
Main.unit
Set the POWER switch on the rear
panel to “ON.”
The POWER indicator on the unit
lights up.
Sub.units
Press .
3
Set.the.same.S-AIR.ID.for.the.
main.unit.and.the.sub.units.
Main.unit
Set the S-AIR ID selector on the rear
panel to the desired S-AIR ID.
Sub.units
Set the S-AIR ID selector on the rear
panel to the same S-AIR ID as the
main unit.
Tip
The S-AIR ID is set at the factory to “A.”