SMC Networks SMCWBR11S-N - Manual (Page 60)

C HAPTER 6 | Network Settings
LAN Setting
– 60 –
◆ Subnet Mask — Indicate the local subnet mask.
(Default: 255.255.255.0.)
◆ DHCP Server — Enable this feature to assign IP settings to wired and
wireless clients connected to the Mini Broadband Router. The IP
address, subnet mask, default gateway, and Domain Name Server
(DNS) address are dynamically assigned to clients. (Options: Enable,
Disable; Default: Enable)
◆ Start/End IP Address — Specify the start and end IP addresses of a
range that the DHCP server can allocate to DHCP clients. Note that the
address pool range is always in the same subnet as the unit’s IP
setting. The maximum clients that the unit can support is 253.
◆ Lease Time — Select a time limit for the use of an IP address from the
IP pool. When the time limit expires, the client has to request a new IP
address. The lease time is expressed in seconds. (Options: Forever, Two
weeks, One week, Two days, One day, Half day, Two hours, One hour,
Half hour; Default: One week)
◆ LLTD — Link Layer Topology Discovery (LLTD) is a Microsoft proprietary
discovery protocol which can be used for both wired and wireless
networks. (Options: Disable/Enable, Default: Enable)
◆ IGMP Proxy — Enables IGMP proxy on the Mini Broadband Router.
(Options: Disable/Enable, Default: Disable)
◆ UPNP — Allows the device to advertise its UPnP capabilities. (Default:
Enable)
◆ Router Advertisement — Enables the sending and receiving of
routing advertisements to discover the existence of neighboring
routers. (Options: Disable/Enable, Default: Disable)
◆ PPPoE Relay — When enabled, the Mini Broadband Router will forward
PPPoE messages to clients. Clients are then able to connect to the
PPPoE service through the WAN port. (Options: Disable/Enable,
Default: Disable)
◆ DNS Proxy — Enables DNS proxy on the LAN port. DNS Proxy receives
DNS queries from the local network and forwards them to an Internet
DNS server. (Default: Enable)