SMC Networks SMCWBR11S-N User Manual
Page 56
C
HAPTER
6
| Network Settings
WAN Setting
– 56 –
The following items are displayed on this page:
◆
Server IP — Sets a PPTP server IP Address. (Default: pptp_server)
◆
User Name — Sets the PPTP user name for the WAN port. (Default:
pptp_user; Range: 1~32 characters)
◆
Password — Sets a PPTP password for the WAN port. (Default:
pptp_password; Range: 1~32 characters)
◆
Verify Password — Prompts you to re-enter your chosen password.
◆
Address Mode — Sets a PPTP network mode. (Default: Static)
◆
IP Address — Sets the static IP address. (Default: 0.0.0.0, available
when PPTP Network Mode is set to static IP.)
◆
Subnet Mask — Sets the static IP subnet mask. (Default:
255.255.255.0, available when PPTP Network Mode is set to static IP.)
◆
Default Gateway — The IP address of the gateway router for the Mini
Broadband Router, which is used if the requested destination address is
not on the local subnet.
◆
Operation Mode — Selects the operation mode as Keep Alive, or
Manual. (Default: Keep Alive)
■
Keep Alive Mode: The Mini Broadband Router will periodically
check your Internet connection and automatically re-establish your
connection when disconnected. (Default: 60 seconds)
■
Manual Mode: The unit will remain connected to the Internet
without disconnecting.
◆
Primary DNS Server — The IP address of the Primary Domain Name
Server. A DNS maps numerical IP addresses to domain names and can
be used to identify network hosts by familiar names instead of the IP
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
◆
Secondary DNS Server — The IP address of the Secondary Domain
Name Server.
◆
MAC Clone — Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC
address of the Mini Broadband Router's WAN interface to match the
PC's MAC address provided to your ISP for registration. You can enter
the registered MAC address manually by typing it in the boxes
provided. Otherwise, connect only the PC with the registered MAC
address to the Mini Broadband Router, then click the “Clone your PC’s
MAC Address” (Default: Disable)