SMC Networks SMCWBR11S-N - Manual (Page 102)

C HAPTER 9 | Firewall Configuration
MAC/IP/Port Filtering
– 102 –
◆ Destination IP Address — Specifies the destination IP address to
block or allow traffic from.
◆ Source IP Address — Specifies the source IP address to block or allow
traffic from.
◆ Protocol — Specifies the destination port type, TCP, UDP or ICMP.
(Default: None).
◆ Destination Port Range — Specifies the range of destination port to
block traffic from the specified LAN IP address from reaching.
◆ Source Port Range — Specifies the range of source port to block
traffic from the specified LAN IP address from reaching.
◆ Action — Specifies if traffic should be accepted or dropped. (Default:
Accept)
◆ Comment — Enter a useful comment to help identify the filtering rules.
C URRENT F ILTER
R ULES
The Current Filter Table displays the configured IP addresses and ports that
are permitted or denied access to and from the Mini Broadband Router.
◆ Select — Selects a table entry.
◆ MAC Address — Displays a MAC address to filter.
◆ Destination IP Address — Displays the destination IP address.
◆ Source IP Address — Displays the source IP address.
◆ Protocol — Displays the destination port type.
◆ Destination Port Range — Displays the destination port range.
◆ Source Port Range — Displays the source port range.
◆ Action — Displays if the specified traffic is accepted or dropped.
◆ Comment — Displays a useful comment to identify the routing rules.