SMC Networks SMCWBR11S-N - Manual (Page 48)

C HAPTER 5 | Operation Mode
Logging In
– 48 –
L OGGING I N
It is recommended to make initial configuration changes by connecting a
PC directly to the Mini Broadband Router's LAN port. The Mini Broadband
Router has a default IP address of 192.168.2.1 and a subnet mask of
255.255.255.0. If your PC is set to “Obtain an IP address automatically”
(that is, set as a DHCP client), you can connect immediately to the web
interface. Otherwise, you must set your PC IP address to be on the same
subnet as the Mini Broadband Router (that is, the PC and Mini Broadband
Router addresses must both start 192.168.2.x).
To access the configuration menu, follow these steps:
1.
Use your web browser to connect to the management interface using
the default IP address of 192.168.2.1.
2. Log into the Mini Broadband Router management interface by entering
the default user name “admin” and password “smcadmin,” then click
OK.
N OTE :
It is strongly recommended to change the default password the first
time you access the web interface. For information on changing passwords,
see “Administration Settings” on page 108 .
Figure 23: Logging On