Step 3 - wan settings - pptp, Figure 20: wizard step 3 - wan settings - pptp – SMC Networks SMCWBR11S-N User Manual

Page 41

HAPTER

| Initial Configuration

Setup Wizard

– 41 –

provided. Otherwise, connect only the PC with the registered MAC

address to the Mini Broadband Router, then click the “Clone your PC’s

MAC Address” (Default: Disable)

TEP

3 - WAN

ETTINGS

- PPTP

Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing

virtual private networks. The service is provided in many European

countries.

Figure 20: Wizard Step 3 - WAN Settings - PPTP

The following items are displayed on this page:

◆

Server IP — Sets the PPTP server IP Address. (Default: pptp_server)

◆

User Name — Sets the PPTP user name for the WAN port.

(Default: pptp_user; Range: 1~32 characters)

◆

Password — Sets a PPTP password for the WAN port. (Default:

pptp_password; Range: 1~32 characters)

◆

Verify Password — Prompts you to re-enter your chosen password.

◆

Address Mode — Sets a PPTP network mode. (Default: Static)