Sharp UP-820F - Manual (Page 63)

61
5
Error Recovery
With the manual clear operation, you can clear various item memories when necessary. This operation
should be done only when the master or system breaks down.
(1) Manual clearing procedure
In case of trouble, you can compulsively clear item memories causing the trouble and restore your
system using the following procedure,
Clearing procedure
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “DATA CLEAR” and press the
e
key.
The DATA CLEAR window will appear.
3.
Referring to the list on the next page, select the
corresponding item and press the
e
key.
The above-mentioned manual clearing jobs should be performed at the advice of your
authorized SHARP dealer.
NOTE
1. Manual clear operation