Sharp UP-820F - Manual (Page 51)

49
(2) Optional programming for the remote printer – master and satellite
With the following procedure, you can specify what items to be printed on the remote printer.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “SETTING” and press the
e
key.
The SETTING window will appear.
3.
Select “OPTIONAL” and press the
e
key.
The OPTIONAL window will appear.
4.
Select “PRINT SELECT2” and press the
e
key.
The PRINT SELECT2 window will appear.
5.
Make appropriate settings for items to be printed on the
remote printer and press the
e
key.
(See the next page for programming for individual items.)
6.
After programming for the items, press the
c
key.