Sharp UP-820F - Manual (Page 46)

44
At a satellite, you can choose which machine, either the master or the satellite, should be searched first for
the PLU/EAN code. If you specify that the master should be searched first and enter the PLU/EAN code, the
master is first searched and then the satellite is searched, and vice versa.
However, either choice of search order made at the master is invalid. In other words, even if you specify at
the master that the satellite should be first searched, the master will be first searched.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “SETTING” and press the
e
key.
The SETTING window will appear.
3.
Select “INLINE CONFIG” and press the
e
key.
The INLINE CONFIG window will appear.
4.
Move the cursor to the “LOOKUP ORDER” line.
Select “MA”(Master) or “SA”(Satellite) with the
.
key(toggle
key) and press the
e
key.
6. Choosing whether to search the master or satellite
first for the PLU/EAN code – satellite