Star Micronics 150 - Manual (Page 60)

Control Codes PcOS Series 150 Programmer's Guide
Bar codes
Page 50 Rev G 12/14/99
Function Bar code height
ASCII [ESC] [EM] B
Hexadecimal 1BH 19H 42H
Decimal <27> <25> <66>
IPCL &%BH
1
>
2
>
EPOS [GS] h
Description This command sets the bar code height. Where is the number of print
passes, each pass is about 0.11 inch high. If n = <0>, the printer returns to the
default values of four passes for all except UPC, which has default values of
seven. Any value from zero to nine may be specified.
Function Set bar code justification and human readable number print modes
ASCII [ESC] [EM] J
Hexadecimal 1BH 19H 4AH
Decimal <27> <25> <74>
IPCL &%BJ
1
>
2
>
EPOS none
The power on default is center justified with numbers on UPC bar codes.
Note: This command only effects bar code printing.
Description This command selects the operation of the bar code justification and number
printing.
Where n-bits n IPCL 76543210
------xx Justification
0 00 ------00 Left
1 01 ------01 Center
2 02 ------10 Right
----xx-- Human readable
0 00 ----00-- No numbers
4 04 ----01-- Numbers on UPC bar codes
8 08 ----10-- Numbers on non-UPC bar codes
12 12 ----11-- Numbers on all bar codes