Star Micronics 150 - Manual (Page 3)

Programmer’s Guide PcOS Series 150 Change History
12/14/99 Rev G Page i
Change History
Rev. G
Added Telpar emulation
Added USB description
Added Redefine Character Set and Euro Character Commands
Updated Command Summary Tables
Rev. F
Removed redundant codes on page 82
Added Option 1: Epson emulation on page 90
Added Line Feed Before Cut to page 92
Added SSD Signal to page 96
Added Epson/Axiohm and STAR cash drawer connectors on page 118
Changed Code 3 of 9 to Code 39
Rev. E
Reformatted entire document
Corrected miscellaneous spelling and grammar mistakes
Changed RS1284 to IEEE 1284
Rev. D Update for Firmware Rev 1.20
Added NCR2567 emulation commands
Rev. C Update
Added section on parallel-port PnP
Added information about the web site
Added section on Star emulation
Removed all references to the cover (The Series 150 Printer does not have a switch on the cover.)
Added trademarks for OKIDATA and Star
Added Code 93 to bar code section
Added bar code justification commands
Rev. B Update
Corrected physical specifications
Corrected warranty information
Rev. A Initial Release