Star Micronics 150 - Manual (Page 139)

Programmer's Guide PcOS Series 150 Printing Graphics
12/14/99 Rev G Page 129
[ESC]U<1> Select unidirectional print for better alignment.
[ESC]: Select 12 cpi.
[ESC]3<34> Set line spacing to 0.157 inch. (This is slightly smaller than 1/6 inch.)
<201> Send the line graphic characters to the printer.
<205><205><205><205><205><205><205><205><205>
<205><205><205><205><205><205><205><205><205>
<205><205><205><205>
<187>[CR][LF]
<186> PcOS PRINTERS <186>[CR][LF]
<186> <186>[CR][LF]
<186> MADE TO ORDER <186>[CR][LF]
<186> BUILT TO LAST <186>[CR][LF]
<200>
<205><205><205><205><205><205><205><205><205>
<205><205><205><205><205><205><205><205><205>
<205><205><205><205>
<188>[CR][LF] This finishes the line graphics.
[ESC]U<0> Reenable bidirectional printing.
[ESC]0 Set standard 1/8-inch line spacing.
[SI] Set 17 cpi.
[CR][LF] Finish the form.
ST# 2000 OP# 00067 TE# 021 0035[CR][LF]
KLEENEX FAM D04 QTY 1 1.68 J[CR][LF]
RITZ D01 QTY 1 2.50 D[CR][LF]
CHIPS D01 QTY 1 1.50 D[CR][LF]
STORAGE BAG D04 QTY 1 1.50 J[CR][LF]
SUB TOTAL 7.18[CR][LF]
SALES TAX 1 .50[CR][LF]
------[CR][LF]
TOTAL 7.68[CR][LF]
CASH TEND 20.00[CR][LF]
CHANGE DUE 12.23[CR][LF]
[CR][LF]
[ESC]a<1>
THANK YOU FOR SHOPPING WITH US[CR][LF]
[ESC]a<0>
[CR][LF]
{DATE:0} {TIME:0}[CR][LF]
Figure 25 Receipt with extended graphic
characters