Star Micronics 150 - Manual (Page 48)

Control Codes PcOS Series 150 Programmer's Guide
Character Attributes
Page 38 Rev G 12/14/99
Function Select superscript
ASCII [ESC] S <0>
Hexadecimal 1BH 53H 00H
Decimal <27> <83> <0>
IPCL &%SP
EPOS none
Description This command selects superscript. All following characters will be printed half
size on the upper side of the print line.
Note: This feature is not available in all print modes. See page 30 for available
modes.
Function Select subscript
ASCII [ESC] S <1>
Hexadecimal 1BH 53H 01H
Decimal <27> <83> <1>
IPCL &%SB
EPOS none
Description This command selects subscript. All following characters will be printed half
size on the bottom side of the print line.
Note: This feature is not available in all print modes. See page 30 for available
modes.
Function End superscript or subscript
ASCII [ESC] T
Hexadecimal 1BH 54H
Decimal <27> <84>
IPCL &%SE
EPOS none
Description This command cancels superscript or subscript.
Function Begin italics
ASCII [ESC] % G
Hexadecimal 1BH 25H 47H
Decimal <27> <37> <71>
IPCL &%MI
EPOS [ESC] 4
Description This command begins italic print mode.
Note: Italics are not available in all print modes. See page 30 for available
modes.