Sanyo PLC-XE33 - Manual (Page 19)

PLC-XE33 Basic Serial Command Specifications
18/22
6.52. Computer 1 Component Command
Command “C54” [CR]
Detail
Select Component input in Computer 1.
Although projector returns “OK”, Input search is not executed with this command
while Input search is set to On1 or On2,
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.53. AUTO PC ADJ. Command
Command “C89” [CR]
Detail
Execute Auto PC Adj. function.
This command operates the same as “AUTO PC ADJ.” of main menu.
Projector suspends Auto PC Adj. operation when receiving this command another
time.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.54. PRESENTATION TIMER Command
Command “C8A” [CR]
Detail
Execute Presentation Timer.
This command works the same way as “P-TIMER” button of the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.55. KEYSTONE ↑Command
Command “C8E” [CR]
Detail Correct keystone distortion by reducing upper part of image.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.56. KEYSTONE ↓Command
Command “C8F” [CR]
Detail Correct keystone distortion by reducing down part of image.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]