Sanyo PLC-XE33 - Manual (Page 17)

PLC-XE33 Basic Serial Command Specifications
16/22
6.40. D.ZOOM – Command
Command “C31” [CR]
Detail
Enter Digital Zoom mode and reduce image size.
This command works the same as “D.ZOOM
▼” button of the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.41. Computer1 S-Video Command
Command “C34” [CR]
Detail
Select S-Video of Computer1 input.
Although projector returns “OK”, Input search is not executed with this command
while Input search is set to On1 or On2,
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.42. Image Colorboard Command
Command “C39” [CR]
Detail Set image to Colorboard mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.43. POINTER RIGHT Command
Command “C3A” [CR]
Detail
Move the Pointer of On-Screen Display Menu to the right.
This command works differently from the pointer “>” of the projector and remote
control, and has no function of Volume +.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.44. POINTER LEFT Command
Command “C3B” [CR]
Detail
Move the Pointer of On-Screen Display Menu to the left.
This command works differently from the pointer “<” of the projector and remote
control, and has no function of Volume +.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.45. POINTER UP Command
Command “C3C” [CR]
Detail
Move up the Pointer of On-Screen Display Menu.
This command works the same way as the pointer “
▲” of the projector.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]