Sanyo PLC-XE33 - Manual (Page 18)

PLC-XE33 Basic Serial Command Specifications
17/22
6.46. POINTER DOWN Command
Command “C3D” [CR]
Detail
Move down the Pointer of On-Screen Display Menu.
This command works the same way as the pointer “
▼” of the projector.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.47. ENTER Command
Command “C3F” [CR]
Detail
This command works the same way as “SELECT” button of the projector and
remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.48. FREEZE ON Command
Command “C43” [CR]
Detail
Freeze on-screen image.
This command works the same way as “FREEZE” button of the remote control for
Freeze ON, but does not work for Freeze OFF.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.49. FREEZE OFF Command
Command “C44” [CR]
Detail
Cancel Freeze mode.
This command works the same way as “FREEZE” button of the remote control for
Freeze OFF, but does not work for Freeze ON.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.50. Computer 1 Analog RGB Command
Command “C50” [CR]
Detail
Select Analog RGB input in Computer 1.
Although projector returns “OK”, Input search is not executed with this command
while Input search is set to On1 or On2,
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.51. Computer 1 Scart Command
Command “C51” [CR]
Detail
Select Scart input in Computer 1
Although projector returns “OK”, Input search is not executed with this command
while Input search is set to On1 or On2,
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]