Sanyo PLC-XE33 - Manual (Page 13)

PLC-XE33 Basic Serial Command Specifications
12/22
6.15. VIDEO MUTE ON Command
Command “C0D”[CR]
Detail
Video Mute ON.
This command works the same way as “NO SHOW” button of the remote control
for No Show ON, but does not work for No Show OFF.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.16. VIDEO MUTE OFF Command
Command “C0E” [CR]
Detail
Video Mute OFF.
This command works the same way as “NO SHOW” button of remote control for
No Show OFF, but does not work for No Show ON.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.17. Screen Normal size Command
Command “C0F” [CR]
Detail
Set screen mode to Normal.
This command is invalid while D.Zoom is in operation.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.18. Screen Wide size Command
Command “C10” [CR]
Detail
Set screen mode to Wide.
This command is invalid while D.Zoom is in operation.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.19. Image Standard Command
Command “C11” [CR]
Detail Set image to Standard mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.20. Image Real Command
Command “C12” [CR]
Detail Set image to Real mode.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]