Sanyo PLC-XE33 - Manual (Page 11)

PLC-XE33 Basic Serial Command Specifications
10/22
6.5. POWER ON Command
Command “C00” [CR]
Detail
Power ON
When already Power is ON, nothing is done.
When sending this command during processing Countdown, Countdown is
terminated.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.6. POWER OFF Command Quick Power OFF
Command “C01” [CR]
Detail
Power OFF (Standby)
When Power is OFF with ON/STAND-BY button of the projector and remote
control, “Power OFF?” is displayed. However, as soon as this command is sent,
Quick Power OFF is executed.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.7. POWER OFF Command
Command “C02” [CR]
Detail
Power OFF (Standby).
The command operates the same Power OFF function as ON/STAND-BY button
of the projector and remote control.
Once this command is sent, “Power OFF?” is displayed. If this command is sent
again while it is displayed, Power OFF is executed.
When sending this command during Countdown, Countdown is terminated.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.8. Computer 1 Command
Command “C05” [CR]
Detail
Select Computer 1 Input
Although projector returns “OK”, Input search is not executed with this command
while Input search is set to On1 or On2,
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.9. Computer 2 Command
Command “C06” [CR]
Detail
Select Computer2 Input
Note 1) Although projector returns “OK”, Input search is not executed with this
command while Input search is set to On1 or On2,
Note 2) Although projector returns “OK”, this command is not executed while
Monitor out is selected in Terminal menu,
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]