Sanyo DSR-C100 - Manual (Page 7)

PART NAMES AND FUNCTIONS
Front panel
1 Operation panel cover
Remove this cover in order to use the MENU
button and CURSOR button to operate the
camera.
• Removing the operation panel cover
Use a screwdriver to loosen the fixing
screws, and then slide the operation panel
cover to the left to remove it.
Note: Be careful not to drop the operation panel
cover when removing it.
2 Operation panel
1 MENU button
This button is used to display menu screens.
2 CURSOR button
This button is used to select items in the
menu screens and to change settings.
In addition, it is used to select images to be
played back and to select playback functions.
3 SET button
This button is used to accept items selected
in the menu screens and setting values.
4 Extension port
This port is used to copy images to
removable media such as a CompactFlash
card.
5 EJECT button (See page 70)
6 NTSC/PAL select switch
This switch is used to select the video format.
NTSC: NTSC format
PAL: PAL format
Note: This switch must be set before the power is
turned on. If it is set after the power is
turned on, the setting will be ignored.
NTSC
PAL
SET MENU
2
1 2 3 4 6
1
3
4
5
L42A4/US (DSR-C100) GB 2001, 4, 16
6 English