Setting the recording method, Pre-alarm recording flow, English 41 – Sanyo DSR-C100 User Manual

Page 42

SETTING THE RECORDING METHOD

Pre-alarm recording flow

Pre-alarm (PRE1) recording starts from
10:00:00

Images are stored to the pre-alarm recording area.

An emergency situation develops at
10:20:00, and you want to record images
in the post-alarm area.

Post-alarm (POST1) recording starts when the
hold-up switch is pressed and held.

Post-alarm recording is stopped at
10:25:00.

Post-alarm (POST1) recording stops when the
hold-up switch is released.

Backup recording starts.

If there is 20 minutes or more of available
recording time remaining in the alarm recording
area of the hard disk, pre-alarm (PRE2) recording
starts automatically at 10:25:00.

An emergency situation develops again at
10:27:00 and you want to record images in
the post-alarm2 area.

Post-alarm (POST2) recording starts when the alarm
switch is pressed and held.

Post-alarm recording is stopped at
10:29:00.

When the hold-up switch is released, “ALARM REC
FULL” appears on the screen and recording stops.

Images at 10:00:00

Images at 10:05:00

Images at 10:20:00

Images at 10:21:00

Images at 10:25:00

Images at 10:24:00

Images at 10:28:00

Images at 10:27:00

Pre-alarm (PRE1) area recording in progress

Post-alarm (POST1) area recording in progress

Post-alarm (POST2) area recording in progress

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

POST1-ALARM REC

REMAIN SHOTS:6834

PRE2-ALARM REC

REMAIN SHOTS:6834

POST2-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

PRE1-ALARM REC

REMAIN SHOTS:6834

POST1-ALARM REC

POST2-ALARM REC

L42A4/US (DSR-C100) GB 2001, 4, 16

English