Sanyo DSR-C100 - Manual (Page 35)

Setting a password for initializing the hard disk
(CHANGE PASSWORD (INITIAL))
This password is used when “INITIALIZE” is selected from the HDD SET screen.
Example: To change the initial setting of “END” to “CMR”
1
Use the CURSOR (l or j) button to select
“SETTINGS” and then press the SET button.
The SETTINGS screen will be displayed.
2
Use the CURSOR (j or l) button to select
“KEY WORD SET” and then press the SET
button.
The KEY WORD SET screen will be displayed.
3
Use the CURSOR (l) button to select
“CHANGE PASSWORD (INITIAL)” and then
press the SET button.
The cursor will move to the “OLD
PASSWORD” box in the CHANGE
PASSWORD-INITIALIZE screen.
4
Use the CURSOR (l) button to select
“END” and then press the SET button.
The initial setting “END” will be cleared and
the cursor will move to the “NEW
PASSWORD” box.
5
Use the CURSOR button to select “C” and
then press the SET button.
The selected letter will appear as “ö”. Enter
“MR” in the same way.
SET
(KEY WORD SET)
FILE ID :P
CAMERA ID:HALL1
COMMENT :SANYO DIGITAL
RECORDING CAMERA
CHANGE PASSWORD (DELETE)
CHANGE PASSWORD (INITIAL)
(CHANGE PASSWORD-INITIALIZE)
OLD PASSWORD:
NEW PASSWORD:
VERIFICATION:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
BS END
SET
(CHANGE PASSWORD-INITIALIZE)
OLD PASSWORD:
NEW PASSWORD:
VERIFICATION:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
BS END
(CHANGE PASSWORD-INITIALIZE)
OLD PASSWORD:
NEW PASSWORD:
VERIFICATION:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
BS END
SET
(CHANGE PASSWORD-INITIALIZE)
OLD PASSWORD:
NEW PASSWORD:*
VERIFICATION:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
BS END
(CHANGE PASSWORD-INITIALIZE)
OLD PASSWORD:
NEW PASSWORD:***
VERIFICATION:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
BS END
L42A4/US (DSR-C100) GB 2001, 4, 16
34 English