Sanyo DSR-C100 - Manual (Page 26)

HARD DISK CAPACITY SETTINGS (HDD SET)
Changing the alarm capacity
After the hard disk has been initialized and when
no post-alarm images have yet been recorded in
the pre-alarm recording area of the hard disk,
“SPACE SET” will be displayed on the screen.
If “SPACE SET” is displayed on the screen, you can
then change the alarm capacity. If images have
been recorded in the post-alarm recording area,
then the alarm capacity cannot be changed. Delete
the alarm images or initialize the hard disk before
changing the alarm recording area capacity.
1
Use the CURSOR (j or l) button to
select “SETTINGS” and then press the SET
button.
The SETTINGS screen will be displayed.
2
Use the CURSOR (j or l) button to
select “HDD SET” and then press the SET
button.
The HDD SET screen will be displayed.
3
Use the CURSOR (j or l) button to
select “SPACE SET” and then press the SET
button.
The SPACE SET screen will be displayed.
4
Use the CURSOR button to reset the
capacity of the alarm recording area.
Example:
1 Set the PRE ALARM item to 30 minutes.
2 Set the POST ALARM item to 40 minutes.
The “SUSPICION SHOTS” and “ALARM
TIME” settings will be made automatically.
Note: If some images have already been recorded
in the suspicion recording area, the setting
time for the alarm recording capacity will
change.
5
Use the CURSOR (j or l) button to
select “SETUP” and then use the CURSOR
(d or c) button to select “YES” and then
press the SET button.
The capacity of the alarm recording area will
be changed, and the SPACE SET screen will be
displayed.
If you select “NO”, the display will return to
the HDD SET screen.
(HDD SET)
6834PCS>
SPACE SET
INITIALIZE
[MENU] (SETTINGS)
(SPACE SET)
PRE ALARM 30 MIN
POST ALARM 40 MIN
SETUP NO
(SPACE SET)
PRE ALARM 30 MIN
POST ALARM 40 MIN
SETUP YES
DO NOT POWER OFF!
SETTING NOW!
(SPACE SET)
PRE ALARM 30 MIN
POST ALARM 40 MIN
SETUP YES
L42A4/US (DSR-C100) GB 2001, 4, 16
English 25