Stanton SCS.4DJ - Manual (Page 56)

57
6.8 MIDI Controller Mode
MIDI CONTROLLER MODE
SCS.4DJ is not only a powerful all-in-one solution, but also acts as a highly functional MIDI
controller, compatible with a wide range of DJ applications such as Native Instruments Traktor™,
Atomix Virtual DJ™ and Mixvibes Cross™.
SCS.4DJ sends NOTE ON messages when buttons are pressed, Note off messages when buttons
are released, and Control Change messages when sliders or knobs are moved. The LEDs on
SCS.4DJ can be controlled by host applications by sending Note on messages for individual LEDs
and Control Change messages for controlling the LEDs in VU meters.
MIDI note number and Control Change message numbers can be edited offline on your computer.
Please visit www.stantondj.com/scs4dj.htm for details.
MIDI Channel – Allows you to set the channel upon which your SCS4.DJ sends/receives MIDI
commands from 1-16. Use the Navigation wheel to change the channel number.
MIDI Mode – Highlight this item and press ENTER to enter MIDI Controller Mode. Note that this will
shut down the SCS.4DJ playback functionality. When a host computer is attached MIDI messages
will be sent to the host computer and messages from the host computer to illuminate LEDs will be
honoured.
For a complete list of MIDI commands available for SCS.4DJ, please visit
www.stantondj.com/scs4dj.htm