Stanton SCS.4DJ User Manual
Page 53
54
6.5 Display Settings Display
Set Language – English/French/German/Spanish
- Sets the language of the screens on SCS.4DJ
Load Confirm – On/Off
- Provides a warning when loading a track into a playing deck, or ejecting a Mass Storage Device
when a song is playing off the drive.
Track time – Remaining/Elapsed
- Changes the time displayed for each track on the Home and Waveform screens from Remaining
to Elapsed.
Jump on Load – On/Off
- Sets the unit to automatically switch to the
HOME/WAVEFORM screen upon loading a song, or to
remain in the
BROWSE/PLAYLIST screens.
End of track warning time
- gives a visible warning of when the track is ending, with a selectable time of 5,10,20,30 seconds
Auto Shut Off – 10 minutes, 30 minutes, disabled
- This control allows you to select a time after which the unit will shut down if you have not touched
the unit, or no music has been playing. Use this to save power, as well as extend the life of your
SCS.4DJ.
NOTE: Auto Shut Off does not turn off your SCS.4DJ if your unit is in AUTO DJ mode.
Hide Demo Content – Off/On
- When this item is turned on it will cause the built in audio demo content to not be
displayed in the Browse menus.
Contrast – screen contrast