Stanton SCS.4DJ User Manual

Page 34

4.8 Microphone Controls

4.9 Recording Controls

MIC Volume

This knob controls the volume of your

MICROPHONE output.

Record Button

The

RECORD BUTTON is used to record a CD quality (16bit/44.1khz).WAV file on your Mass

Storage Device. To engage recording, press the

RECORD BUTTON once. To end recording, press

the

RECORD BUTTON again.

If there is more than one mass storage device attached, then a pop-up menu with a list allows

you to select which device to save your recording to. You can also hit the

BACK button to exit

without recording. The

RECORD button will flash when the device is close to full and recording will

automatically turn off if the device is full. To end your recording, press the

RECORD button again.

When a recording session is complete the session will appear in the Browse menu with a name

containing the SCS.4DJ system name you have selected, the time of day and date.

NOTE: SCS.4DJ will record on the selected Mass Storage Device until you turn off recording

or run out of space. If you run out of space, you can press the RECORD button, and if

you have another Mass Storage Device connected, you may select your other device and

continue recording.