Stanton SCS.4DJ User Manual

Page 33

4.7 Headphone (Cue) & Master Volume Controls

CUE Select (Headphone Symbol Buttons)

These buttons select which deck (A or B) will be fed into the CUE side of the

HEADPHONE MIX

control. Use this control to pre-listen to your decks before you move the volume/crossfader controls

to allow the audience to hear your performance. As well, this allows you to hear what activating any

of your

FX will sound like before turning up the volume of a song.

MIX

When the knob is turned fully to the

LEFT side, this will allow you to hear your selected CUE source

through your headphones (Channel A or B). When this knob is turned to the

RIGHT, the MASTER

OUTPUT will be fed to your headphones. When the knob is in the MIDDLE, both sources will be

heard at the same time.

PLEASE NOTE: When the SPLIT CUE option is selected in the SYSTEM MENU, the MASTER

OUTPUT is routed to the right side of your headphones, and the CUE SELECT to the right

side. The cue mix knob acts as a fader controlling the relative volume of the left earpiece

and the right earpiece.

Headphone Volume

This knob controls the volume of your

HEADPHONE output.

Master Volume

This knob controls the volume of your SCS.4DJ to your main 1/4” and RCA outputs on the rear of

your unit.