Savin 4045e - Manual (Page 86)

Copying
74
2
F
Press [ OK ] .
When the settings are successfully
stored, m appears on the left side
and the program name appears on
the right side of the registered pro-
gram number. The display returns
to the initial copy display for a
while.
Changing a Stored Program
A
Check the program settings.
Note
r When you want to check the
contents of a program, recall the
program. See p.74 “Recalling a
Program”.
B
Repeat steps
A to D of “Storing a
Program”.
C
Press [ Register ] .
Repeat steps
E, F of “Storing a Pro-
gram”.
Note
r When it is overwritten, the pre-
vious program is deleted.
Deleting a Program
A
Press the {Program} key.
B
Press [ Delete ] .
C
Press the program number you
want to delete.
D
Press [ Yes ] .
The program is deleted, and the
display returns to the initial copy
display.
Recalling a Program
A
Press the {Program} key.
B
Press [ Recall ] .
C
Press the program number you
want to recall.
The stored settings are displayed.
Note
r Program numbers with m
against them already have set-
tings in them.
D
Place the originals, and then press
the {Start} key.