Savin 4045e - Manual (Page 24)

Placing Originals
12
1
Placing Originals in the Auto
Document Feeder
Settings should be made in the fol-
lowing situations:
v When placing originals one by one:
p.13 “SADF mode”
v When placing originals consisting of
more than 80 pages:
p.12 “Batch mode”
v When copying originals of various
sizes:
p.13 “Mixed size mode”
v When placing custom size originals:
p.14 “Placing custom size origi-
nals”
Note
r Do not stack originals beyond the
limit mark on the side fence of the
ADF.
r The last page should be on the bot-
tom.
r Do not cover the sensors with your
hands, or place objects on them.
This could cause the size to be de-
tected incorrectly, or the paper
misfeed error message to appear.
Also, do not place anything on the
cover as this could cause a mal-
function.
1. Sensors
A
Set the document guide to the
original size.
B
Align the edges of the original
and place it on the ADF with the
side to be copied facing up.
1. Limit mark
2. Document guide
Note
r Straighten curls in the originals
before placing them on the
ADF.
r To prevent multiple sheets from
being fed at once, fan the origi-
nal before placing it on the ADF.
r Set the original squarely.
Batch mode
In Batch mode, the machine copies an
original including more than 80 pages
as one document, even if it is placed
on the ADF in parts.
A
Press [ Special Original ] .
Zewh210E
ZGHS060E