Savin 4045e - Manual (Page 82)

Copying
70
2
Note
r The slip sheets should be the same
size and orientation as the copy pa-
per.
r You cannot place the copy paper in
the bypass tray.
r You can specify the pages up to 20.
A
Press [ Cover/Slip Sheet ] .
B
Press [ Desig./Chapter ] .
C
Press the key to select the chapter
number.
D
Enter the page number of the
original's location you want to
copy onto a slip sheet with the
number keys, and then press the
{#} key.
E
Select the paper tray for slip
sheets.
F
To specify another page location,
repeat steps
C to E.
Note
r To select chapters 11 to 20, press
the [ T11 ∼
20 ] key.
G
When page designation is com-
plete, press
[ OK ] .
H
Press [ OK ] .
I
Select the paper tray that contains
the sheet paper to copy the origi-
nals.
J
Place your originals in the ADF,
and then press the {Start} key.
Chapter
The page locations you specify with
this function will appear on the front
of copy sheets.
Preparation
Before selecting this function,
press
[ Dup./Combine/Series ] and se-
lect Duplex (1 Sided
→
2 Sided)
mode or Combine mode.
Note
r This function can be used only
when you use the Duplex (1
Sided
→
2 Sided) or Combine func-
tion.
r You can specify the pages up to 20.
A
Press [ Cover/Slip Sheet ] .
B
Press [ Desig./Chapter ] .
C
Press [ Chapter ] .
D
Press the key to select the chapter
number.
E
Enter the page location of the first
page of the first chapter with the
number keys, and then press the
{#} key.
F
To specify another page location,
repeat steps
D to E.
Note
r To select chapters 11 to 20, press
the [ T11-20 ] key.