Savin 4045e - Manual (Page 23)

Placing Originals
11
1
A
Press [ Special Original ] .
B
Select the original orientation.
Standard orientation
A Make sure that is select-
ed.
90
°
turn
A Place your original in the land-
scape orientation, and then
press
.
C
Press [ OK ] .
Placing Originals on the
Exposure Glass
A
Lift the exposure glass cover or
ADF.
Important
r Do not lift the exposure glass
cover or ADF forcefully. Other-
wise, the cover of the ADF
might open or be damaged.
Note
r Be sure to lift the exposure glass
cover or ADF by more than 30
°
.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
B
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
1. Positioning mark
2. Left scale
Note
r Start with the first page to be
copied.
C
Lower the exposure glass cover or
ADF.
ZEWH050E