Siemens se5880 - Manual (Page 57)

SIEMENS se5880 Ethernet Security Router
User’s Guide Chapter 6 Security Setup
SNMP
SIEMENS 51
SNMP IP Filter
Activating an IP Filter range will limit SNMP requests to only those that originate from the designated
addresses or LAN. To activate IP filtering:
1. Click SNMP IP Filter from the SNMP Configuration page. This displays the SNMP IP Filter Configuration
page. The current IP filter ranges are displayed in the IP Addresses.
2. In Start IP Range, enter the first IP address in the range to be filtered.
3. In End IP Range, enter the last IP address in the range to be filtered.
4. Optionally click LAN.
5. Click Add IP Range.
SNMP Password
An SNMP password is used to authenticate an SNMP Manager. Once authenticated, SNMP set requests will
be performed. To set the SNMP Password:
1. Click SNMP Password from the SNMP Configuration page. This displays the SNMP Password page.
2. Enter the New Password and New Password (again).
3. Click Apply.