Sanyo Scp 8100 - Manual (Page 46)

Reviewing Voice Dialling Tags
1. Press to access the main menu.
2. Highlight Voice Service and press .
3. Highlight Voice Dial and press .
4. Highlight Review and press .
5. Highlight the desired entry and press .
– or –
Highlight the desired entry and press
(right softkey).
Highlight Play and press .
ᮣ Highlight Erase during step 5 above, and select Yes to erase
Voice Dial tag.
Erasing All Voice Dial Tags
1. Press to access the main menu.
2. Highlight Voice Service and press .
3. Highlight Voice Dial and press .
4. Highlight Erase All and press .
5. Highlight Yes and press .
Options
83
9. Voice Services
Using Voice-Activated Dialling
You can use a Voice Dial tag to automatically dial a phone number
in your Internal Phone Book. Your phone can store up to 30
Voice Dial tags. (To create a Voice Dial tag, see “Programming
Voice Dial Tag to Your Phone” below.)
1. Press shortly.
2. Follow the voice prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
Note: Record Voice Dial tags in a quiet environment and without the aid
of an accessory (for example, a headset or hands-free car kit).
Programming Voice Dial Tag to Your Phone
1. Press to access the main menu.
2. Highlight Voice Service and press .
3. Highlight Voice Dial and press .
4. Highlight Program and press .
5. The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the entry (name) in the phone book
entry list, and press .
8. Select the labelled category that includes the phone number
(display shows “Voice Dial Recorded”).
82