Sanyo Scp 8100 - Manual (Page 23)

Unlocking Your Phone
1. Press (left softkey).
2. Enter your lock code.
Changing the Lock Code
1. From the Security Menu display (See “Accessing the Security
Menu” on the previous page), highlight Others and press .
2. Highlight Change Lock and press .
3. Enter new lock code, “1234” for example, in the box under
New Code.
4. Re-enter the new code in the box under Re-enter Code.
Calling in Lock Mode
You can place calls to 911 and to your special numbers when in
lock mode.
To place an outgoing call in lock mode:
ᮣ To call an emergency number, special number, or Customer
Service, enter the phone number and press
.
Unlock
37
3. Security
Accessing the Security Menu
You must enter your lock code to view the Security menu.
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight Security and press .
4. Enter your lock code.
Tip: If you can’t recall your lock code, try using the last four digits of your
phone number or 0000.
Locking Your Phone
When your phone is locked, you can only receive incoming calls
or make calls to 911, Customer Service, or special numbers.
1. From the Security Menu display (See “Accessing the Security
Menu” above), highlight Lock Phone and press .
2. Highlight Lock Now or On Power-up and press .
3. Depending on your preference, highlight either Full Lock or
Except Incom.Calls and press .
ᮣ Full Lock: All phone calls except for emergency number,
(Customer Service) or special numbers
cannot be made. No phone calls can be received except for
special numbers.
ᮣ Except Incom.Calls: All phone calls except for emergency
number,
(Customer Service) or special
numbers cannot be made, but all incoming calls can be
received.
Tip: If you want to cancel the “On Power-up” setting before turning the
phone off, select Unlocked during step 2 above.
36