To replace the clock battery on the motherboard, To replace – Sun Microsystems Sun Fire T1000 User Manual
Page 83
Chapter 3
Removing and Replacing FRUs
71
▼
To Replace the Clock Battery on the
Motherboard
1. Unpackage the replacement battery.
2. Press the new battery into the motherboard (
) with the + facing upward.
FIGURE 3-13
Replacing the Clock Battery on the Motherboard
3. Perform the procedures described in
“Common Procedures for Finishing Up” on
4. Use the ALOM setdate command to set the day and time.
Use the setdate command before you power-on the host system. For details about this
command, refer to the Sun Fire T1000 Server Advanced Lights Out Management (ALOM) Guide.