Sun Microsystems Sun Fire T1000 - Manual (Page 75)

Chapter 3 Removing and Replacing FRUs 63
FIGURE 3-8 Replacing the Power Supply
▼ To Remove the Hard Drive
1. Perform the procedures described in “Common Procedures for Parts
Replacement” on page 53 .
2. Disconnect the cable from the hard drive.
3. Unsnap the catches on the latches ( FIGURE 3-9 ) on the front of the disk drive and
remove the drive and tray assembly from the chassis.
Figure showing how to remove the hard disk drive.
FIGURE 3-9 Removing the Hard Drive
Fastener
Power supply
Latches
Hard drive