Control key, Display keys, Reverting to idle status – Siemens Gigaset S450IP User Manual
Page 19: Control key display keys reverting to idle status

18
Operating the handset
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / telephony.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
Control key
In this user guide, the side of the control
key that you must press in the given oper-
ating situation is shown in black. Example:
t for "press up on the control key".
The control key has the following func-
tions:
When the handset is in idle status
s Open
directory.
v
Open main menu.
u
Open list of handsets.
t
Adjust the ringer tone volume
of the handset (page 24).
In lists and menus
t / s Scroll up/down line by line.
v
Open submenu or confirm
selection.
u
Go back one menu level or
cancel.
In an input field
You can use the control key to move the
cursor up
t, down s, right v or
left
u.
During an external call
s
Open the directory.
u
Initiate an internal consulta-
tion call.
t
Adjust the loudspeaker vol-
ume for operation in earpiece/
handsfree mode.
Display keys
The current display functions are shown in
the bottom display line in reversed high-
lights. The function of the display keys
changes depending on the particular
operating situation.
Example:
1 Current display key functions are shown in
the bottom display line.
2 Display keys
Reverting to idle status
Reverting to idle status from anywhere in
the menu:
¤
Press and hold the end call key
a.
Or:
¤
Do not press any key: after 2 minutes
the display will automatically revert to
idle status.
Changes that you have not confirmed or
saved by pressing
§OK§
,
§Yes§
,
§Save§
,
§Send§
or
Save
§OK§
will be lost.
You will find more information about
operating your Gigaset S45 in the
detailed user guide available online at
2
1
FixedLine
IP