Siemens Gigaset S450IP - Manual (Page 12)

11
First steps
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / starting.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other users on the Internet, the
fixed network or the mobile phone net-
work, you need the services of a VoIP pro-
vider who supports the VoIP SIP standard.
Precondition: You have registered (for
example via your PC) with such a VoIP pro-
vider and set up at least one VoIP account.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from your VoIP pro-
vider.
u Your user name with the VoIP provider,
if this is required by the VoIP provider
u Your registration name
u Your password with the VoIP provider
u VoIP provider general settings
The connection assistant will help you
with the settings.
Starting the connection assistant
Precondition: The base station is con-
nected to the electrical power supply and
the router. Your router is connected to the
Internet (page 10).
Tip: If
VoIP is activated as the default
connection for your phone (default set-
ting page 25), the phone will attempt to
make a direct connection to your VoIP pro-
vider's server after the connection assis-
tant is closed. If incorrect/incomplete
information means that the connection
cannot be made, messages will be dis-
played (page 13).
As soon as the handset battery is suffi-
ciently charged, the message key f on
the handset will flash (around 20 minutes
after you have put the handset in the
charging cradle). Press the message key
f to start the connection assistant.
You will see the following display:
§Yes§ Press the display key to start
the connection assistant.
The settings are configured in
several steps.
~ Enter system PIN (the default
setting is "0000").
Note:
Your phone is preconfigured for dynamic
assignment of the IP address. In order for your
router to "recognize" the phone, dynamic IP
address assignment must also be activated on
the router, meaning that the router's DHCP
server is activated.
Note:
The connection assistant will also start auto-
matically if you try to establish a connection
via the Internet, before you have configured
the necessary settings.
You can also call up the connection assistant at
any time via the menu (page 14).
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No Yes