Seiko Instruments DPU-30 - Manual (Page 51)

5-23
5. Character selection commands
ESC M n Font Select
Code 1B
16
+ 4D
16
+ n
Domain of
function
0 ≤ n ≤ 255
Function Selects the character font.
n
= B: character font (12 × 24 and 24 × 24)
n = B: character font (8 × 16 and 16 × 16)
Details • n is valid only for the least significant bit.
• This setting is also valid for Kanji.
• The character font can be set by ESC ! command but the setting by the command
which has been processed at last becomes valid.
• In default, n = 0.