Seiko Instruments DPU-30 - Manual (Page 30)

5-2
5.1.2 Mode 3
1. Paper feed commands
Command Function See page
CR Carriage Return 5-12
LF Line Feed 5-12
FF Page Length Print 5-12
ESC J Print and Feed Forward 5-13
ESC j Print and Feed Backward 5-13
ESC d Print and Continuous Line Feed 5-13
ESC C Page Length Set 5-14
2. Tab
commands
Command Function See page
HT Horizontal Tab 5-15
ESC D Horizontal Tab Set 5-15
3. Form
commands
Command Function See page
ESC 2 Default Amount of Line Spacing Specify 5-16
ESC 3 Amount of Line Spacing Set 5-16
ESC SP Standard Size Character Right Spacing
Set
5-16
GS L Left Margin Set 5-17
GS W Width of Printing Area Set 5-17
ESC $ Absolute Position of Printing Area Specify 5-18
ESC a Position Align 5-18
4. Character decoration commands
Command Function See page
ESC ! Decorated Characters Collectively Specify 5-19
ESC G
ESC E Bold Characters Specify and Clear
5-20
ESC { Inversion (Flip) Specify and Clear 5-20
ESC - Underline Specify and Clear 5-21
GS ! Character Size Set 5-21
GS B Reverse Character Specify and Clear 5-22