Sharp HT-X1 - Manual (Page 8)

8
HT-X1
Ge
neral Info
rmation
Precautions
" General
! Please ensure that the equipment is positioned in a well-venti-
lated area and that there is at least 4" (10 cm) of free space along
the sides and back. There must also be a minimum of 6" (15 cm)
of free space on the top of the unit.
! Do not place anything on top of the components.
! Do not expose the system to moisture, to temperatures higher
than 140°F (60°C) or to extremely low temperatures.
! If your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and
then turn on your system.
! This system should only be used within the range of 41°F - 95°F
(5°C - 35°C).
Warning:
The voltage used must be the same as that specified by this sys-
tem. Using this product with a higher voltage other than that speci-
fied is dangerous and may result in a fire or other types of accident,
causing damage. SHARP will not be held responsible for any dam-
age resulting from the use of this system with a voltage other than
that specified.
" Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid
exposure to high volume levels, which occurs while turning the unit
on with the volume control setting up high, or while continually lis-
tening at high volumes.
! Use the system on a firm, level surface free
from vibration.
! Keep the system away from direct sun-
light, strong magnetic fields, excessive
dust, humidity and electronic/electrical
equipment (home computers, facsimiles,
etc.) which generates electrical noise.
Subwoofer/amplifier unit
Main unit
4" (10 cm) 4" (10 cm)
4" (10 cm) 4" (10 cm)
4" (10 cm) 4" (10 cm)
4" (10 cm)
6" (15 cm)
6" (15 cm)
6" (15 cm)
4" (10 cm)
4" (10 cm)
! In case of an electrical storm, unplug the
subwoofer/amplifier unit for safety.
! Hold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
! Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.