Sharp HT-X1 - Manual (Page 20)

20
HT-X1
Pre
paration
for Use
System connections (continued)
" Connecting the system connection cable
Connect the main unit and subwoofer/amplifier unit as follows.
" Antenna connection
Note:
Placing the antenna on the system or near the AC power cord may
cause noise pickup. Place the antenna away from the system for
better reception.
Installing the AM loop antenna:
Outdoor FM or AM antenna:
Use an outdoor FM or AM antenna if you require better reception.
Consult your dealer.
When using an outdoor AM antenna, be sure to keep the wire of the
AM loop antenna connected.
Subwoofer/
amplifier unit
1
2
Main unit
1 2
Black
Blue
Blue Black
Antenna terminals
Supplied FM antenna:
Connect the FM antenna wire to the FM
75 OHMS jack and position the FM an-
tenna wire in the direction where the
strongest signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna wire to the
AM and GND terminals. Position the AM
loop antenna for optimum reception.
Place the AM loop antenna on a shelf,
etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
FM
antenna
AM loop
antenna
AM loop
antenna
Outdoor AM antenna
49 feet (15 m)
25 feet
(7.5 m )
Outdoor
FM antenna
Ground wire
Ground rod